wood floor water damage

Wood Floor Water Damage

Wood floor water damage is a dilemma that homeowners deal with all too frequently. This type of damage appears when wood floors are exposed to water or excessive moisture for an extended period. There are numerous potential causes for this, including a broken pipe, a leaky roof, a plumbing leak, or even just an open window during the rainy season. These scenarios show the proneness of wood floors to various kinds of potential problems.  

It’s important to routinely inspect and maintain your wood flooring because the damaging effects of excess water are not often immediately noticeable. Excessive moisture on hardwood floors can lead to a variety of issues like warping, discoloration, or even deterioration, which can compromise the flooring’s structural integrity. High moisture levels, if left untreated, can weaken the wood while creating an ideal environment for mildew and mold to grow. 

It is always better to take preventative measures when it comes to wood floor water damage. You can prevent more damage from occurring by recognizing the signs earlier on.  

Signs Of Wood Floor Water Damage 

It’s now time for you to assess how the water damaged your wood floors. Water damage may be evident in the signs of natural wear that you would mistake for normal wear over time. 

Assess your wood flooring for the following signs: 

  •       Buckling 
  •       Cupping 
  •       Cracking 
  •       Crowning 
  •       Discoloration
  •       Moldy odor 
  •       Warping

Steps To Fix Wood Floor Water Damage 

Step #1: Track Down The Water Source 

You must stop the source before you can begin drying anything out. Check your roof for leaks, burst pipes, and weak points, and make any necessary repairs. You can’t do anything to stop the water damage to the hardwood floors while it’s still pouring in. 

Step #2: Take Away Wet Items 

All wet items must then be moved to a secure area to dry out. This can lessen the amount of water that soaks into your floors, as well as preserve furnishings and rugs. Your wood floors may sustain potentially irreversible damage from a wet rug if you leave it alone.  

Step #3: Take Out Any Surface Water 

Your wood floor will sustain greater damage the longer water is left on it. Thus, as soon as you can, take out any surface water using whatever you have. Although laying down towels and rags may assist quite a deal, a wet vac will work best. For the most effective removal of surface water, use the wide connector on the vacuum hose. Use a squeegee to pull any leftover water together so that it may be vacuumed for a deeper clean. 

The primary objective is to take out the standing water; the floor will be fully dry later. This component need not be flawless.  

Step #4: Make The Floor Clean 

Make your cleaning solution by combining detergent, water, and disinfectant, or use a light wood floor cleaning solution. Next, use a stiff brush to carefully scrub all damaged areas—including baseboards that have been water-damaged. 

This is the point where you might notice paint peeling off your coated floor. Keep your stiff brush clean and practice mindfulness. Furthermore, avoid spilling the cleaning solution straight onto the ground. Rather, dunk the brush into the solution and wait for the excess solution to run off before applying pressure to the wood floor. 

Step #5: Start For Mold Remediation 

Look for evidence of mold on the floorboards. If mold is found, clean the affected area using an abrasive cleaner and a mold treatment solution. After eliminating the discoloration or mold development, thoroughly clean the surface with clean water and use a material that absorbs moisture to wipe it dry.

Step #6: Give The Floors Time To Dry 

Before you start fixing the wood floor water damage, your wood floor must dry naturally. To quicken the process, open your windows and use fans. For your safety, though, you might want to hold off for a few hours or even a half day at least. Wood is susceptible to changes in the amount of moisture, so be patient; drying it off too soon could cause cracks. Excessive heat to quicken the drying process can lead to additional damage to your wood floor. 

Step #7: Sand The Damage Wood Floor 

You may quicken this step significantly by renting a buffer. The damaged wood floor area should be sanded until it is even and flat. This will remove any surface paint that may have remained on the wood floor and deal with a lot of cupping or crowning problems. 

To get rid of all the dust and paint debris, be sure to vacuum once more. Before proceeding, you must constantly strive for a spotless surface. 

Step #8: Replace Any Damaged Panels 

If any wood floor panels appear to be seriously broken, pull them off using a pry bar. The area beneath the floor should be cleaned and treated for mold again, and it should be left to dry completely.   

Wood flooring in most homes is standard size, and replacement panels are readily available at your neighborhood hardware shop. After you have all the materials, glue the new panel to its back and position it accordingly. For a few minutes, hold the panel down to allow the glue to become solid. 

Step #9: Repaint And Restore 

The wood floor should then be repainted, restrained, or furnished. This will give your repaired wood floors even more protection. Due to their oil composition, stain-resistant wood floor sealers generally improve the water-resistance of the floor. Moreover, water-based urethane waterproof sealants are an option. Apply two or three coats of sealer, ensuring that the previous coating is completely dry before moving on to the next. 


While fixable, wood floor water damage can take a while, especially when ventilation is required in between procedures. Furthermore, there can be other kinds of water damage happening beneath or around the wood floors, so fixing the floor alone might not be the best course of action.  

It’s advisable to hand over the job to a professional water damage restoration service if there is a lot of water present or if the damaged area is large. 

Tags: No tags

Comments are closed.